Válvulas de transferencia Masoneilan 78-80H de alta precisión
Detalles del producto
Descripción de producto
1Descripción.
The Model 78-80H is a transfer valve combining a pilot valve of the floating ball type and a three-port valve into one unit and is a high-capacity three-way transfer valve of a set pressure regulating typeEl otro modelo, 08-80H, es el mismo que el 78-80H, excepto que no se combina una válvula piloto y es la llamada válvula de transferencia de tres vías.se puede instalar un 78-80H, conectando 08-80Hs a él al acoplar la presión de salida piloto (SIG.OUT) en el 78-80H a SIG en el 08-80H para simplificar la tubería y lograr la transferencia.
2. Especificaciones
3Cómo ordenar
Válvula Reguladora Reductora de Presión Fisher 99H MR99H
Specifications and ratings for various Type 99 constructions are listed in the Specifications section below. Some specifications for a given regulator as it originally comes from the factory are stamped on the nameplates located on the pilot and actuator spring cases. An additional nameplate may be installed on the pilot to indicate a regulator with O-ring stem seal. These regulators and their installations should be checked for compliance with applicable codes.
Sensor de flujo electromagnético Krohne OPTIFLUX 4000 para combinación con convertidores de señal IFC 050, IFC 100, IFC 300 e IFC 400
The OPTIFLUX 4000 is an electromagnetic flow sensor. Combined with the IFC 050, IFC 100, IFC 300 or IFC 400 signal converters it forms the OPTIFLUX 4050, OPTIFLUX 4100, OPTIFLUX 4300 and OPTIFLUX 4400 electromagnetic flowmeters for basic to advanced applications with aggressive and abrasive media or other conductive liquids.
Medidor de flujo másico Coriolis KROHNE OPTIMASS 6400 para aplicaciones de proceso avanzadas
The OPTIMASS 6400 is the standard high performance Coriolis mass flowmeter for the process industry. The twin bent tube meter offers superior performance and high accuracy in virtually any application: From process control in (petro)chemical applications to concentration measurements in the food and beverage industry to custody transfer filling and transport measurements in the oil and gas industry. Its high-end options also make the OPTIMASS 6400 the optimum device for
Krohne H250 M40 Medidor de caudal de superficie variable para líquidos y gases
* Modular design: from mechanical indicator to 4…20 mA/HART® 7, FF, Profibus-PA and totalizer * Any installation position: vertical, horizontal or in descending pipes * Flange: DN15…150 / ½…6"; also NPT, G, hygienic connections, etc. * -196…+400°C / -320…+752°F; max. 1000 barg / 14500 psig
Por favor, utilice nuestro formulario de contacto de consulta en línea de abajo si tiene alguna pregunta, nuestro equipo se pondrá en contacto con usted tan pronto como sea posible.
