ANDERSON GREENWOOD SERIES 80 PRESSURE RELIEF VALVE
Détails de produit
Description de produit
Types 81, 83 and 86 soft seat design for premium seat tightness provides repeatable leak-tight performance before and after each relief cycle. Full lift design with external adjustable blowdown and replaceable soft seats and seals. Allows higher operating pressure. Gas, vapor and steam service.
TECHNICAL DATA
Sizes:
½" x ¾" to 2" x 3"
Orifices:
0.049 to 1.287 in2 [0.316 to 8.303 cm2]
Connections:
NPT, Flanged
Temperature Range:-423 to +550°F [-253 to +288°C]
Set Pressures:
20 to 10,000 psig [1.40 to 689.5 barg]
Code:
ASME VIII
Request data sheet: VCTDS-00544
ANDERSON GREENWOOD SERIES 80 PRESSURE RELIEF VALVE
Types 81, 83 and 86 soft seat design for premium seat tightness provides repeatable leak-tight performance before and after each relief cycle. Full lift design with external adjustable blowdown and replaceable soft seats and seals. Allows higher operating pressure. Gas, vapor and steam service. TECHNICAL DATA Sizes: ½" x ¾" to 2" x 3" Orifices: 0.049 to 1.287 in2 [0.316 to 8.303 cm2] Connections: NPT, Flanged Temperature Range:-423 to +550°F [-253 to +288°C] Set Pressures: 20
Régulateur de pression Fisher 99H MR99H
Specifications and ratings for various Type 99 constructions are listed in the Specifications section below. Some specifications for a given regulator as it originally comes from the factory are stamped on the nameplates located on the pilot and actuator spring cases. An additional nameplate may be installed on the pilot to indicate a regulator with O-ring stem seal. These regulators and their installations should be checked for compliance with applicable codes.
Capteur de débit électromagnétique Krohne OPTIFLUX 4000 pour combinaison avec les convertisseurs de signaux IFC 050, IFC 100, IFC 300 et IFC 400
The OPTIFLUX 4000 is an electromagnetic flow sensor. Combined with the IFC 050, IFC 100, IFC 300 or IFC 400 signal converters it forms the OPTIFLUX 4050, OPTIFLUX 4100, OPTIFLUX 4300 and OPTIFLUX 4400 electromagnetic flowmeters for basic to advanced applications with aggressive and abrasive media or other conductive liquids.
Krohne OPTIMASS 6400 débitmètre de masse Coriolis pour les applications de procédés avancés
The OPTIMASS 6400 is the standard high performance Coriolis mass flowmeter for the process industry. The twin bent tube meter offers superior performance and high accuracy in virtually any application: From process control in (petro)chemical applications to concentration measurements in the food and beverage industry to custody transfer filling and transport measurements in the oil and gas industry. Its high-end options also make the OPTIMASS 6400 the optimum device for
Veuillez utiliser notre formulaire de contact en ligne ci-dessous si vous avez des questions, notre équipe vous contactera dès que possible.
