Rosemount 5408 Level Transmitter - Non-Contacting Radar 5400
Product Details
| Parameter: | Antenna Type | Value: | Cone Antenna, Process Seal Antenna, Parabolic Antenna |
|---|
Product Description
1. Description
The Rosemount™ 5408 Non-Contacting Radar Level Transmitter uses enhanced technology and Human Centered Design to deliver accurate, reliable measurements on both liquid and solid materials. Using two-wire FMCW technology the Rosemount 5408 deploys a continuous echo to maximize radar signal strength and produce a more robust and reliable measurement. Delivering ease-of-use at every touch point, the Rosemount 5408 uses an intuitive software interface to guide the operator through installation, commissioning, proof-testing and maintenance. Safety certified to IEC 61508 for SIL 2 applications, the Rosemount 5408:SIS reduces the cost of risk, increases efficiency and protects people and the environment.
2. Specification
Accuracy: Standard: ± 0.08 in. (± 2 mm) Ultra accuracy: ± 0.04in. (± 1mm)
Measurement Range: 131 ft (40 m), 82 ft (25 m) for Rosemount 5408:SIS in Safety modeOperating Pressure1450 psi (100 bar)
Operating Temperature: -76 to +482 °F (-60 to +250 °C)
Power Supply: 4-20mA/HART: 12-42.4 VDC (12-30 VDC in Intrinsically Safe installations)
Foundation™ Fieldbus: 9-32 VDC (9-30 VDC in Intrinsically Safe installations and 9-17.5 VDC for FISCO)
Communication Protocol: 4-20mA HART® (2-wire loop-powered), Foundation™ Fieldbus
Certifications/Approvals: ATEX, IECEx, FM, CSA, 3-A, CRN, see full specs for complete list of certifications
Safety: IEC 61508 certified to SIL 2 TÜV tested and WHG approved for overfill prevention
Antenna type: Cone antenna, Process seal antenna, Parabolic antenna
3. Feature
- Low 12V dc lift-off voltage
- Immune to intermittent power loss
- Unique PTFE seal design eliminates the need for O-rings
- Model tailored to SIS requirements, certified to IEC 61508 SIL 2
- Solid measurement with a unique solids algorithm
- Process seal antenna for applications with heavy condensation and aggressive media. Also available with Tri Clamp connection.
- 3-A certified for hygienic applications
4. How to Order
Fisher 99H MR99H Pressure Reducing Regulator Valve
Specifications and ratings for various Type 99 constructions are listed in the Specifications section below. Some specifications for a given regulator as it originally comes from the factory are stamped on the nameplates located on the pilot and actuator spring cases. An additional nameplate may be installed on the pilot to indicate a regulator with O-ring stem seal. These regulators and their installations should be checked for compliance with applicable codes.
Krohne OPTIFLUX 4000 Electromagnetic flow sensor for combination with IFC 050, IFC 100, IFC 300 and IFC 400 signal converters
The OPTIFLUX 4000 is an electromagnetic flow sensor. Combined with the IFC 050, IFC 100, IFC 300 or IFC 400 signal converters it forms the OPTIFLUX 4050, OPTIFLUX 4100, OPTIFLUX 4300 and OPTIFLUX 4400 electromagnetic flowmeters for basic to advanced applications with aggressive and abrasive media or other conductive liquids.
Krohne OPTIMASS 6400 Coriolis mass flowmeter for advanced process applications
The OPTIMASS 6400 is the standard high performance Coriolis mass flowmeter for the process industry. The twin bent tube meter offers superior performance and high accuracy in virtually any application: From process control in (petro)chemical applications to concentration measurements in the food and beverage industry to custody transfer filling and transport measurements in the oil and gas industry. Its high-end options also make the OPTIMASS 6400 the optimum device for
Krohne H250 M40 Variable area flowmeter for liquids and gases
* Modular design: from mechanical indicator to 4…20 mA/HART® 7, FF, Profibus-PA and totalizer * Any installation position: vertical, horizontal or in descending pipes * Flange: DN15…150 / ½…6"; also NPT, G, hygienic connections, etc. * -196…+400°C / -320…+752°F; max. 1000 barg / 14500 psig
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
