-
Samson 3241 Valve group made in germany 4708 3730-3 3271
Samson Pressure regulator: 4708-5322020100000 Samson Positioner: 3730-310000004 Samson Valve: 3241 Samson Actuator: 3271
-
Masoneilan 28000 Series Varipak Control Valves
Size 1” (25 mm) standard 1/2” through 3/4” (15 through 20 mm) available on request Ratings & Connections Flanged: ANSI 150 - 1500 Flangeless for mounting between flanges: ANSI 150 – 2500, UNI-DIN 10 - 400 Screwed: NPT 1/2” through 1” (15 through 25 mm) Body Materials stainless steel; monel; hastelloy C; alloy 20 Actuators integral spring diaphragm Trim full stellite needle plug; multistep anti-cavitation trim available Inherent Characteristics linear Description Designed
-
Rotork CP Series Heavy Duty Fluid Pneumatic Actuator
CP range pneumatic actuators for quarter-turn valves are a versatile, modular, scotch yoke design available in both double-acting and spring-return configurations. The compact and efficient design yields high torques even at low pressures. The design concepts found in Rotork's large, heavy-duty actuators have been applied to the CP range, which brings heavy-duty actuator qualities to small, quarter-turn actuators
-
Crosby ANDERSON GREENWOOD SERIES 80 PRESSURE RELIEF VALVE
Types 81, 83 and 86 soft seat design for premium seat tightness provides repeatable leak-tight performance before and after each relief cycle. Full lift design with external adjustable blowdown and replaceable soft seats and seals. Allows higher operating pressure. Gas, vapor and steam service. TECHNICAL DATA Sizes: ½" x ¾" to 2" x 3" Orifices: 0.049 to 1.287 in2 [0.316 to 8.303 cm2] Connections: NPT, Flanged Temperature Range:-423 to +550°F [-253 to +288°C] Set Pressures: 20
-
Fisher 99H MR99H Pressure Reducing Regulator Valve
Specifications and ratings for various Type 99 constructions are listed in the Specifications section below. Some specifications for a given regulator as it originally comes from the factory are stamped on the nameplates located on the pilot and actuator spring cases. An additional nameplate may be installed on the pilot to indicate a regulator with O-ring stem seal. These regulators and their installations should be checked for compliance with applicable codes.
-
Fisher GX Bolted Bonnet Control Valve and Actuator System
The Fisher GX Bolted Bonnet is a compact, state-of-the-art control valve and actuator system, designed to control a wide range of process liquids, gases and vapors.The GX Bolted Bonnet incorporates a proven bolted bonnet design, simplifying maintenance, while extending the GX portfolio with enhanced versatility for critical applications.The GX Bolted Bonnet is rugged, reliable and easy to select.It requires no actuator sizing — the actuator selection is automatic once the
-
Samson 3244 pneumatic 3-way Globe valve
Official Website Special features Type 3244 Three-way Valve with • Type 3271 Pneumatic Actuator (Fig. 1) • Type 3277 Pneumatic Actuator (Fig. 2) for integral positioner attachment Valve body made of • Cast iron (DIN version only) • Cast steel • Cast stainless steel Undivided valve bonnet, optional with RFID tags with unique identification according to DIN SPEC 91406. The control valves with their modular design can be equipped with various accessories: Positioners, solenoid
-
Samson 3241 DN100 PN40 control vavle group Stainless steel
Samson 3241 Official link Samson Pressure regulator: 4708-5322020100000 Samson Positioner: 3730-310000004 Samson Valve: 3241 DN100 Pn40 Samson Actuator: 3271
