E+H PMP51 series Pressure Transmitter PMP51/PMP51C
Product Details
Product Description
1. Description
The device is used for the following measuring tasks:
• Absolute pressure and gauge pressure measurement in gases, steams or liquids in all areas of process engineering and process measurement technology
• Level, volume or mass measurement in liquids
• High process temperature
• without diaphragm seals up to 130 °C (266 °F), for a maximum of 60 minutes 150 °C (302 °F)
• with diaphragm seals up to 400 °C (752 °F)
• High pressure up to 400 bar (6000 psi)
• International usage thanks to a wide range of approvals
2. Advantage
• Very good reproducibility and long-term stability
• High reference accuracy up to ±0.10 %, as PLATINUM version: ±0.075 %
• Turn down up to 100:1
• Uniform platform for differential pressure, hydrostatics and pressure (Deltabar M – Deltapilot M – Cerabar M)
• Simple, fast commissioning through a user interface designed for real-world applications
• Used for process pressure monitoring up to SIL 2, certified to IEC 61508 Edition 2.0 and IEC 61511 by TÜV NORD
• The patented TempC membrane for the diaphragm seal reduces the measured error caused by environmental and process temperature effects to a minimum.
• ASME-BPE-compliant device versions
Samson 3710 Reversing amplifier with pressure gauge double acting
Official Website Reversing amplifier to operate a double-acting pneumatic actuator using a single-acting pneumatic or electropneumatic positioner or limit switch
E+H RIA15 process indicator Loop-powered Ex ia process indicator as field or control panel device fo
RIA15 process indicator The process indicator is available with 4 to 20 mA or with HART® protocol. In the HART® version up to 4 measured values of one sensor can be indicated in alternation. For this, the indicator can be set as a primary or secondary HART® master and actively inquire the values from the sensor. The small voltage drop of < 1V (< 1.9 V with HART®) is a huge advantage, especially in Ex-applications, where in most cases only a reduced voltage is available.
Flowserve Pneumatic Actuators - Linear - VL Series VL25 Valtek
VL Actuator Valtek VL series spring cylinder linear actuators are powerful, compact, high-performance pneumatic actuators that provide solid throttling or on-off operation for automatic control valves. The positioner supplies air to both sides of the piston, providing stiff, precise movement and high-frequency response and quick stroke speeds.
Samson 3241 DN100 PN40 control vavle group Stainless steel
Samson 3241 Official link Samson Pressure regulator: 4708-5322020100000 Samson Positioner: 3730-310000004 Samson Valve: 3241 DN100 Pn40 Samson Actuator: 3271
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
