Samson 3241 Pneumatic Control Valves Type 3241 Globe Valve

Samson 3241 Official link Special features Type 3241 Globe Valve operated with • Type 3271 Pneumatic Actuator (Type 3241-1 Control Valve) • Type 3277 Pneumatic Actuator (Type 3241-7 Control Valve) Valve body made of • Cast iron • Cast steel, cast stainless steel or cast cold-resisting steel • Forged steel or forged stainless steel • Special materials Undivided valve bonnet up to NPS 6 Valve plug • Metal seal • Soft seal • High-performance metal seal, optional with RFID tags

Masoneilan 41005 Series Cage Guided Valve 4-1500LB

Masoneilan 41005 Series Cage Guided Valve The Masoneilan 41005 Series heavy-duty control valve features balanced trim configurations. This product line offers efficient and stable operation under demanding process conditions, including applications with high-pressure drops and large temperature variations. Optional features include noise attenuation trim, anti-cavitation designs, and various balance seal options to meet a wide range of pressure and temperature requirements.

Masoneilan 21000 Series Single Port Valve

Official Website Baker Hughes offers the Masoneilan 21000 Series heavy top-guided globe valve for a wide range of automated process control applications. The 21000 Series product line features a single-ported design configuration, which permits numerous trim, actuation, and instrumentation solutions, including: Lo-dB* Noise Attenuation Anti-Cavitation Reduced Capacity & Low Flow Trim Cryogenic Configuration Tight Shutoff Environmental Packing Advanced Digital Positioning &

Samson 3251 pneumatic Globe valve

Official Website The Zero Travel 1 Trim (ZT‑1) is intended for a single-stage let‑ down in the FTC (flow-to-close) direction of flow. It is suitable for liquids, two-phase flows, or gases. The benefit of the trim is that a single-stage letdown at different pressures up to Δp = 250 bar can be achieved under certain conditions. Typical applications include: • High-pressure letdown • Critical steam applications

Emerson Keystone GRW0050 Butterfly valve hand wheel GRW serise

KEYSTONE SERIES GR RESILIENT SEATED BUTTERFLY VALVES GRW/GRL (ISO) All Rights Reserved. A heavy-duty industrial resilient-seated butterfly valve

Emerson Keystone Figure 990/920 Resilient Butterfly Valve

1. Description A split body thin disc valve for high flow and modulating service. Figure 990 – Wafer body design. Figure 920 – Lugged body design 2. Features obstruction to flow, resulting in the highest Cv, the lowest pressure drops and the best control characteristics. Rounded, polished disc edge gives full concentric sealing, lower torques, longer seat life and tight shut-off. Triple function, resilient seat isolates body and stem from line media, provides drop-tight shut

Emerson Keystone Figure 320/322 Resilient Seated Butterfly Valve

1. Description Figure 320 is an economical, resilient seated Butterfly valve with dimensions according to ISO standards 2. Features * Bubble-tight shut-off at full rating in both directions. * One piece, specially profiled, wafer-thin disc stem. * Extended body neck allows free access to the actuator where pipe insulation has been fitted. * The seat and disc are the only two parts in contact with the medium. * Face to face dimensions according ISO 3202 Part 3, K1 (ISO 5752

Emerson Keystone GRW Series GRW0050 with handwheel Butterfly valve